10.0.0.138

IP address 10.0.0.138 is the management IP of 2WIRE router, if you have a question about 10.0.0.138, this article may help you. It is a private IP address that can only be used in LAN, just like 192.168.1.1 and 192.168.0.1.

How to connect the router to the computer?

First, connect the correct wiring. The ADSL telephone line is connected to the WAN port, and the network cable is connected to any LAN port. The PHONE interface behind is not available. Please do not connect to the PHONE interface. The network is set to automatically get the IP address.

How to log in to 10.0.0.138 to set the parameters?

Open a IE browser, enter the http://10.0.0.138/mdc in the browser’s address bar, and enter the router’s advanced interface. Enter the password admin, password is our test settings, you can also change the password. Http://10.0.0.138/mdc to enter the complete.

Setting up a broadband account

Click on the Configure under the Broband Link in the main menu to enter the ADSL settings.

  1. Fill in the local broadband VCI, VPI, select Bridged LLC>PVC LLC>PVC Search, click Enable.
  2. Enter your broadband account in the box behind PPP Username Username, and enter your broadband password in PPP box Password and below Confirm Password Password. Finally, click SUBMIT to save your settings.

Wireless settings for 10.0.0.138

The wireless lamp is lit by the wireless light of the router after the connection with wireless network card, which is different from other routers. Restore the factory default password as the 10 digit number on the back of the router WPA.

192.168.0.254

The IP address 192.168.0.254 and tplinkrepeater.net are the web management page of the TP-Link range extender. The range expander is wirelessly connected to the Wi-Fi router to strengthen and extend its signal to the area that you can’t reach, while reducing signal interference to ensure that the entire home or office can reliably cover Wi-Fi.

How to log into 192.168.0.254?

  1. Insert the expander into the power socket near the host router and wait for the power indicator to be stable.
  2. Connect your computer to the extender’s wireless network.
  3. Launch a web browser and type http://tplinkrepeater.net or http://192.168.0.254 in the address field.
  4. Enter the username and password. The default username and password are admin.
  5. When you successfully log in, you will be prompted to set up a new username and password, which is for security.

Can not connect IP address 192.168.0.254?

When you just switch on the power of the WiFi expander, you can’t connect to the 192.168.0.254, because the expander is starting. You just have to wait for a while, when the power turns green, you can connect it now.

How to configure wireless network on 192.168.0.254?

  1. Login the web management page of the range extender.
  2. Go to Settings > Wireless > Connect to Network.
  3. Enable Connect to 2.4GHz Network and click Wireless Scanner to find all available networks.
  4. Select the 2.4GHz host network you want to extend.
  5. After selecting the host network, SSID and security types will be automatically filled. If the selected network is encrypted, enter the password in the password field.
  6. Click Save.

192.168.100.1

How to get into the settings page of the wireless router 192.168.100.1. Our wireless routing. Just bought, how to enter his settings page? Let’s share my experience with you.

I bought a HUAWEI light cat. The IP written at the bottom of the router is 192.168.100.1, but I can’t get in and out of it.

How to log in the IP address 192.168.100.1?

First, let the computer and the router in the same LAN, IP segment to the same, such as the router address is 192.168.100.1, your computer IP can be set to 192.168.100.2, the subnet mask is 255.255.255.0.

You can look at Ping for a while, run – command – enter Ping 192.168.100.1.

You have to confirm that the IP address of the light cat is 192.168.100.1, because it can be changed later, and the router is not reset.

How to find the default username and password?

This method is suitable for just bought wireless router, or the router has not been set up. We can take a look at the bottom of the router we purchased. The IP address and password will be displayed on it.

If you can not find them, click default router password list. Or reset router to factory setting.

Now you should be able to enter the router. If not, your router’s IP may be 192.168.1.1 or 192.168.0.1.

A router is a device that connects the LAN and Wan in the Internet. It automatically selects and sets the route according to the channel situation, and sends the signal in the best way and in the order of front and back.