Can not open 192.168.0.1

In the process of using the wireless router in the Internet, sometimes we can’t meet the 192.168.0.1, can’t log in to the WEB management page of the wireless router, and set up the parameters of the wireless Internet.

In the face of this failure phenomenon, how should we solve this problem? In fact, the main cause of this fault is the two aspects:
Tools / raw materials
Wireless router
Familiar with DNS settings
Step / method
Hardware factors such as line connection, wireless router, etc.

Hardware failure mainly includes the phenomenon of network connection cable, the phenomenon of network connection, the phenomenon of the phenomenon of the phenomenon of the phenomenon of the phenomenon of the phenomenon of the phenomenon of the phenomenon of the phenomenon of the connection of the network, the abnormal phenomenon of the computer system and the damage of the hub or router.

Of course, the input voltage is not normal, the device internal temperature is too high, or the device suffered lightning, etc. it is also easy to cause the hardware failure. In the observation of the wireless router control panel data signals, we found that the signal when the intermittent flashing that the line is connected to normal, once found signal lamp working condition is not normal, we must first check whether the broadband line connection is reliable, internal core wire is in short circuit or broken state, in this regard, we can change with other normal cable test. After the exclusion of cable, we need to check the radio network connection settings, for example, we can re set the IP address of the network card, if found in the automatic access to the IP address of the wireless router, you can consider the use of static IP address while disabling the firewall used in the workstation system.

Parameter settings for a wireless router or IE browser.
If the above method is still valid, we need to open the IE browser on the workstation system to see if the connection settings are correct. In this regard, we can first open the IE browser window, and in the window of the menu bar, click the “tools” / “Internet options” command, in the pop-up window of the Internet option,
Click “connect” tab,
And in the corresponding tab page will not be a dial-up connection project selected, and click on the “OK” button. After that, click LAN settings button, and then set up all of the settings in the window, and then click OK.
Restore factory settings
If this approach is still not able to solve the problem, the only thing we can do is to restore the parameters of the wireless router to the factory default settings, and re install the corresponding device driver. If this method is not good, then we can conclude that the wireless router itself has a hardware failure, at this time only the professional and technical personnel to come to solve, or need to replace a new router.